CHECKWIND v2.2.0 released

March 20, 2018

CHECKWIND v2.2.0 is now live and can be downloaded here. New features and enhancements include: Simplification of building structure inputs – “h” now represents the average roof height. CHECKWIND data files created using previous versions will calculate this value automatically. View building footprint overlay by holding mouse button down on… Read more…

CHECKWIND v2.1.0 released

January 19, 2018

CHECKWIND v2.1.0 is now live and can be downloaded here. New features and enhancements include: Improved Terrain Category detection to AS/NZS 1170. Lee zone maps for New Zealand now exactly match NIWA recommendations. Improved Topographic Multiplier (Mt) results to AS/NZS 1170. Improved Exposure Category detection to ASCE 7-10, ASCE 7-16,… Read more…

CHECKPOLE v5.0.0 released

January 17, 2018

CHECKPOLE v5.0.0 is now live and can be downloaded here. New features and enhancements include: Introduction of base plate gussets. Introduction of TIA-222-H. Automated Terrain Category and Terrain/Height Multiplier (Mz,cat) detection to AS/NZS 1170. Automatic shielding structure detection for the Shielding Multiplier (Ms) to AS/NZS 1170. Lee zone maps for… Read more…

CHECKWIND v2.0.0 released

October 10, 2017

CHECKWIND v2.0.0 is now live and can be downloaded here. New features and enhancements include: Automated Terrain Category and Terrain/Height Multiplier (Mz,cat) detection to AS/NZS 1170. Automated Exposure Category and Velocity Pressure Coefficient (Kz) detection to ASCE 7-10, ASCE 7-16, TIA-222-G and TIA-222-H. New “Viewer” mode for unlicenced users to… Read more…

CHECKWIND v1.0.0 released

July 31, 2017

Since opening the CHECKWIND beta in August of last year, over 500 users have supported us by downloading, sharing and providing feedback. It’s taken longer than we hoped to get to this point, but we think you’ll agree it was worth the wait. We listened to your feedback and have… Read more…

CHECKPOLE v4.3.0 released

June 6, 2017

CHECKPOLE v4.3.0 is now live and can be downloaded here. New features and enhancements include: Let Revolutio put you in touch with engineers from across Australia and New Zealand to certify your monopoles and foundations. Over 80 new Tongyu panel antennas added to the ancillary library. Site wind parameters are… Read more…

CHECKPOLE v4.2.0 released

May 5, 2017

CHECKPOLE v4.2.0 is now live and can be downloaded here. New features and enhancements include: Improved Shielding Multiplier (Ms) wizard with automated height estimation based on footprint area and Terrain Category. Analysis screen delineates between monopole segments and identifies load locations. Updated Rocla Proforma to include Inertia data. General user… Read more…

CHECKPOLE v4.1.0 released

March 28, 2017

CHECKPOLE v4.1.0 is now live and can be downloaded here. New features and enhancements include: Introduction of BS EN 40-3-3 shaft design. Directions with an average ground slope exceeding 0.2 for the Shielding Multiplier (Ms) are shown in red. Refinement of the Topographic Multiplier (Mt) calculation engine for AS/NZS 1170.2… Read more…